Do not need to fix to wall, ground or others. No special tools required.
To start with, please turn off the main power for safety reasons.
After fixing the light components, connect the wires according to the mark of the fire wire, the zero wire, and the ground wire.
After the light wires are connected, adjust the projection angle of the light using the open end wrench.
After the installation, please turn the switch on and test whether the light is on. If so, the installation is complete.
If you want to make the flood light more stable, or keep it from being taken away, you can fix the lights to the wall or the ground.
Tools: open end wrench, electric screwdriver, impact drill, and hammer.
To begin with, please follow the 4 simple steps above.
Step 5. Make a punch mark on the surface to be installed.
Step 6. Select appropriate drill bit, punch a hole with the impact drill, and knock the expansion screw into the hole first.
Step 7. Take out the light components, align the mounting hole of the light bracket with the punched hole, fix the bracket by inserting the self-tapping screw with a power screwdriver. If the expansion bolt is used, align the bracket mounting hole with the bolt and tighten the nut with an open end wrench.
If you buy LED security lights with motion sensor, on additional step after standard step 2:
Additional step: After the light wires are connected, adjust the lighting, time, and distance knob on the sensor head, and adjust the projection angle of the lamp through the open end wrench.
